Helmets

Helmets

28 products

28 products

Quick view
Bell HP77 Carbon
£4,299.99
Quick view
Bell HP7 EVO-III Carbon
£2,983.33
Quick view
Bell RS7 Carbon
from £1,141.66
Quick view
Bell GT6 Carbon
£964.99
Quick view
Bell RS7-K Carbon
£964.99
Quick view
Bell KC7-CMR Carbon
£921.99
Quick view
Bell HP10 Rally Carbon
£2,105.83
Quick view
Bell MAG-10 Rally Carbon
£1,053.33
Quick view
Bell HP10 Carbon
£1,842.49
Quick view
Bell MAG-10 Carbon
£964.99
Quick view
Bell RS7 Pro Stamina
£833.33
Quick view
Bell RS7 Pro
£658.33
Quick view
Bell GT6 Pro
£614.16
Quick view
Bell RS7-K
from £521.74
Quick view
Bell GT5 Sport
£439.16
Quick view
Bell KC7-CMR
£426.09
Bell HP77 Carbon

Bell HP77 Carbon

£4,299.99 ex VAT
/

The HP77, based on Bell’s highly successful, F1 World Champion proven HP7 design, provides the latest impact protection by lowering the visor opening by 12 mm and reinforcing the front of the helmet with advanced ballistic protection. The HP77 is the most advanced FIA8860-2018 helmet in Bell’s product line and sets a new standard for lightweight, aerodynamically superior carbon fiber helmet performance for the intense demands of open-wheel and open-cockpit forms of racing. The HP77 is homologated to the FIA8860-2018 ABP standard, the most rigorous sport helmet standard on the planet, designed for professional formula racers competing at the highest levels of the sport.

FEATURES

  • Visor opening lowered 12 mm with integrated visor panel into the front of the helmet for added ballistic protection from middle size debris
  • High-strength and high modulus carbon fibers ultra-lightweight FIA8860 carbon shell
  • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
  • Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation
  • Air intake system includes two-part center and side air intakes (installed)
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
  • Integrated channels in face piece offer multiple options to install drink tube and radio systems
  • Top spoiler, top and chin bar gurneys available separately
  • Factory installed Hans anchors as original equipment
  • Available with frontal chinbar hole for the introduction of the drinking tube
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • HP helmet bag included
  • Shield and pivot kit: SE077, SV(SE07)
  • Homologation: FIA8860-2018 ABP
  • Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
  • Color: Carbon, Matte Finish
  • Sizes: 54 to 59+

IN THE BOX

  • HP77
  • Clear SE077 DSAF Shield
  • HP Helmet Bag
  • Hans Anchors Installed

SIZING

CERTIFICATIONS

  • FIA8860-2018 ABP
Bell HP7 EVO-III Carbon
Bell HP7 EVO-III Carbon
Bell HP7 EVO-III Carbon
Bell HP7 EVO-III Carbon

Bell HP7 EVO-III Carbon

£2,983.33 ex VAT
/

Developed through close collaboration with leading F1 drivers and teams, the carbon fiber HP7 is aerodynamically sleek, lightweight and efficient for the intense demands of open-wheel and open-cockpit forms of racing. The updated HP7 EVO-III meets the FIA’s FIA8860-2018 “super helmet” standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing in high-speed forms of motorsports, the HP7 allows racers to take advantage of the latest technological innovations including aerospace composite materials and advanced energy absorbing liner systems.

FEATURES

  • High-strength and high modulus carbon fiber ultra-lightweight FIA8860 carbon shell
  • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
  • Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation
  • Air intake system includes two-part center and side air intakes (installed)
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities Integrated channels in face piece offer multiple options to install drink tube and radio systems
  • Available in two versions: with or without duckbill (chin spoiler)
  • Top spoiler, top and chin bar gurneys available separately
  • Factory installed Hans anchors as original equipment
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Available with frontal chinbar hole for the introduction of the drinking tube
  • HP helmet bag included
  • Shield and pivot kit: SE07, SV(SE07)
  • Homologation: FIA8860-2018
  • Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
  • Color: Carbon, Matte Finish
  • Sizes: 54 to 59+

IN THE BOX

  • HP7
  • Clear SE07 DSAF Shield
  • HP Helmet Bag
  • Hans Anchors Installed

SIZING

CERTIFICATIONS

  • FIA8860-2018
Bell RS7 Carbon
Bell RS7 Carbon
Bell RS7 Carbon
Bell RS7 Carbon

Bell RS7 Carbon

£1,141.66 ex VAT
/

Based on the innovative HP7 design and featuring an ultra-lightweight carbon shell, using Bell’s high-pressure proprietary molding system, the RS7 Carbon provides racers with unmatched acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels for maximum airflow and ventilation.

FEATURES

  • Ultra-lightweight carbon shell
  • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
  • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
  • Air intake system includes two-part center and side air intakes (installed)
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
  • Integrated channels in face piece offer multiple options to install drink tube and radio systems
  • Available in two versions: with or without duckbill (chin spoiler)
  • Rear spoiler, top and chin bar gurneys available separately
  • Top air attachments available separately
  • Factory installed Hans anchors as original equipment
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Shield and pivot kit: SE07, SV(SE07)
  • Homologation: Snell SA2015 and FIA8859-2015 approved
  • Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order - additional charges will apply)
  • Color: Carbon, Glossy finish
  • Sizes: 54 to 61+

IN THE BOX

  • RS7 Carbon
  • Clear SE07 DSAF Shield
  • Draw String Helmet Bag
  • Hans Anchors Installed

SIZING

CERTIFICATIONS

  • Snell SA2020
  • FIA8859-2015
Bell GT6 Carbon

Bell GT6 Carbon

£964.99 ex VAT
/

Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear-muffs providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version).

FEATURES

  • Ultra-lightweight Premium Carbon Composite shell
  • Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06)
  • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
  • Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
  • Extraction vents to maximize cooling and air circulation
  • Factory installed Hans anchors as original equipment
  • Optional Top and Side air intakes available for use with external cooling system
  • Optional side-cover (L or R) for smooth integration of radio connectors and hydration system
  • Optional Ear-Muffs for increased noise insulation
  • Interior: Dark Grey High Strength – High Comfort FR Fabric
  • Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
  • Color: Carbon, Gloss finish
  • Sizes: 54-55-56-57-58-59-60-61-61+
  • Homologation: FIA8859-2015 & SNELL SA2020

IN THE BOX

  • GT6 Carbon
  • Shield type SE06
  • HP Helmet Bag
  • Hans Anchors Installed

SIZING

CERTIFICATIONS

  • FIA8859-2015
  • SNELL SA2020
Bell RS7-K Carbon

Bell RS7-K Carbon

£964.99 ex VAT
/

Designed for the professional kart racer who values weight and performance, the RS7-K Carbon is the karting-only version (non-fire retardant, extra durable interior) of the RS7. Based on the HP7 design and featuring a lightweight carbon shell, the RS7-K Carbon uses an innovative shell and shield design to improve acoustic comfort while enhancing aerodynamic performance and energy absorbing capacities. The sleek, modern design features an advanced ventilation system, double screen anti-fog (DSAF) visor and a rubber gasket seal ensuring that water does not enter the eye opening in rain conditions.

FEATURES

  • Lightweight carbon shell
  • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
  • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
  • Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
  • Non-fireproof lining for extra durability
  • RS7K is NOT compatible with FHR anchor systems or devices
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Shield and pivot kit: SE07, SV(SE07)
  • Homologation: Snell K2020 approved
  • Color: carbon, glossy finish
  • Sizes: 57 to 61+

IN THE BOX

  • RS7-K Carbon
  • Clear SE07 DSAF Shield
  • Draw String Helmet Bag

SIZING

CERTIFICATIONS

  • Snell K2020
Bell KC7-CMR Carbon

Bell KC7-CMR Carbon

£921.99 ex VAT
/

Bell continues to innovate with the KC7 CMR Carbon, the first ultra-lightweight carbon youth karting helmet on the market. Based on the advanced HP7 and incorporating the same performance technology, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rain conditions. Certified to the FIA/Snell CMR standard designed for karting drivers under the age of 15, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers.

FEATURES

  • Ultra-lightweight carbon shell: 1095g in sizes 54 to 56 and 1130g in sizes 57 to 59 (+ or - 3%)
  • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
  • Optical grade injection molded Double Screen Anti-Fog (DSAF) 2MM visor for anti-fog control and superior visibility
  • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
  • Air intake system includes two-part center and side air intakes (installed)
  • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
  • Rear spoiler, top and chin bar gurneys available separately
  • KC7 Carbon is NOT compatible with FHR anchors or devices
  • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
  • Shield and pivot kit: SE07 2MM, SV(SE07)
  • Homologation: Snell-FIA CMR-2016
  • Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order - additional charges will apply)
  • Color: Carbon, glossy finish
  • Sizes: 54 (6 3/4) to 59 (7 3/8)

IN THE BOX

  • KC7 CMR Carbon
  • Clear SE07 2MM DSAF Shield
  • Draw String Helmet Bag

SIZING

CERTIFICATIONS

  • Snell-FIA
  • CMR-2016
Bell HP10 Rally Carbon
Bell HP10 Rally Carbon
Bell HP10 Rally Carbon
Bell HP10 Rally Carbon

Bell HP10 Rally Carbon

£2,105.83 ex VAT
/

The new HP10 Rally incorporates the advanced technology of our HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate performance open-face rally helmet. Featuring an ultra-lightweight carbon shell combined with a Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, highly comfortable professional fit combined with outstanding sound-insulation, HP10 Rally is the new reference for rally drivers and co-drivers looking for the ultimate product. Our helmet R&D engineers worked day and night with sound engineers and top rally drivers to deliver a helmet that would set new standards! No effort was spared to obtain outstanding performances of sound insulation and communication efficiency, incorporating ZeroNoise® electronics, high power speakers and noise-cancelling microphone, and to deliver the best experience in terms of safety, comfort and communication.

FEATURES

  • Open face helmet featuring ultra-lightweight FIA8860-2018 Advanced full carbon shell
  • Fast Removable Carbon Half Chin Bar (HCB) quickly and easily detachable to ensure fast access to breathing ways without the need to remove the helmet in case of emergency
  • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
  • Adjustable carbon sun peak
  • Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) fitted as original equipment + dark smoked (M10-Long version) supplied in the box
  • Removable cheek pads with multi densities advanced materials for optimal comfort
  • Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation
  • ZeroNoise® electronics, high power (yet lightweight) speakers and adjustable efficient noise cancelling microphone integrated in Half Chin Bar
  • Ultra-reliable heavy duty In-Molded Female Nexus Connector (compatible with other brands of amplifiers)
  • Detachable right side-cover for smooth integration of the Female Nexus Connector
  • Flat right side carbon cover supplied in the box, for those who prefer using a straight cable coming out of the helmet instead of the integrated connector
  • Air extraction holes to maximize cooling
  • Factory installed Hans anchors as original equipment
  • HP helmet bag included
  • Interior: Dark Grey High Strength – High Comfort FR Fabric
  • Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
  • Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
  • Color: Carbon, Matte finish
  • Sizes: 54-55-56-57-58-59-60-61-61+
  • Homologation: FIA8860-2018

    • IN THE BOX

    • HP10 RALLY
    • dark smoked (M10-Long version)
    • HP Helmet Bag

    SIZING

    CERTIFICATIONS

    • FIA8860-2018
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon
    Bell MAG-10 Rally Carbon

    Bell MAG-10 Rally Carbon

    £1,053.33 ex VAT
    /

    Based on the HP10 Rally, the MAG-10 RALLY CARBON is a sophisticated, ultra-lightweight Premium Helmet in a sleek and modern design that provides a high performance open-face rally helmet. Featuring an ultra-lightweight carbon composite shell combined with our Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, highly comfortable professional fit combined with outstanding sound-insulation, MAG-10 RALLY CARBON is the new helmet of choice for rally drivers and co-drivers looking for a high-end Premium product. Benefiting from the extensive Research & Development program undertaken for the HP10, the MAG-10 RALLY CARBON sets new standards in the Premium Helmets category! No effort was spared to obtain outstanding performances of sound insulation and communication efficiency, incorporating ZeroNoise® electronics, high power speakers and noise cancelling microphone, and to deliver the best experience in terms of safety, comfort and communication.

    FEATURES

    • Open face helmet featuring ultra-lightweight Premium carbon composite shell
    • Fast Removable Carbon Half Chin Bar (HCB) quickly and easily detachable to ensure fast access to breathing ways without the need to remove the helmet in case of emergency
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Adjustable carbon sun peak
    • Adjustable integrated anti-scratch dark smoked sunscreen
    • Integrated cheek pads with multi densities advanced materials for optimal comfort
    • Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation
    • ZeroNoise® electronics, high power (yet lightweight) speakers and efficient noise cancelling microphone.
    • Ultra-reliable heavy duty In-Molded Female Nexus Connector (compatible with other brands of amplifiers)
    • Detachable right side-cover for smooth integration of the Female Nexus Connector
    • Flat right side cover supplied in the box, for those who prefer using a straight cable coming out of the helmet instead of the integrated connector
    • Factory installed Hans anchors as original equipment
    • Interior: Dark Grey High Strength – High Comfort FR Fabric
    • Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
    • Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
    • Color: Carbon, Gloss finish
    • Sizes: 54-55-56-57-58-59-60-61-61+
    • Homologation: FIA8859-2015 & SNELL SA2020

    IN THE BOX

    • MAG-10 RALLY Carbon
    • M10S-Short
    • HP Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • FIA8859-2015
    • SNELL SA2020
    Bell HP10 Carbon
    Bell HP10 Carbon
    Bell HP10 Carbon
    Bell HP10 Carbon

    Bell HP10 Carbon

    £1,842.49 ex VAT
    /

    The new HP10 incorporates the advanced technology of our HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate open-face helmet protection. Featuring an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, and highly comfortable professional fit. HP10 is perfect for racers who want the feeling of an open-face helmet but demand outstanding comfort and superior performance.

    FEATURES

    • Open face helmet featuring ultra-lightweight FIA8860-2018 Advanced full carbon shell
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Adjustable carbon sun peak
    • Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) fitted as original equipment + dark smoked (M10-Long version) supplied in the box
    • Removable cheek pads with multi densities foam for optimal comfort
    • Air extraction holes to maximize cooling
    • Factory installed Hans anchors as original equipment
    • HP helmet bag included
    • Interior: Dark Grey High Strength – High Comfort FR Fabric
    • Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (on special order).
    • Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
    • Color: Carbon, Matte finish
    • Sizes: 54-55-56-57-58-59-60-61-61+
    • Homologation: FIA8860-2018

    IN THE BOX

    • HP10
    •  ML Red mirror (M10S-Short)
    • dark smoked (M10-Long version)
    • HP Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • FIA8860-2018
    Bell MAG-10 Carbon
    Bell MAG-10 Carbon
    Bell MAG-10 Carbon
    Bell MAG-10 Carbon

    Bell MAG-10 Carbon

    £964.99 ex VAT
    /

    HelmetThe MAG-10 CARBON is a sophisticated, ultra-lightweight Premium Helmets in a sleek and modern design that provides a high performance open-face helmet for racetrack use. Featuring an ultra-lightweight carbon composite shell, an adjustable carbon fiber peak combined with our new adjustable and integrated sunscreen, a highly comfortable professional fit, MAG-10 CARBON is the helmet of choice for racing drivers looking for a high-end super-light Premium open face helmet for circuit use.

    FEATURES

    • Open face helmet featuring ultra-lightweight Premium carbon composite shell
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Adjustable carbon sun peak
    • Adjustable integrated anti-scratch dark smoked sunscreen (M10S-Short)
    • Removable cheek pads with multi densities advanced materials for optimal comfort
    • Factory installed Hans anchors as original equipment
    • Interior: Dark Grey High Strength – High Comfort FR Fabric
    • Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
    • Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
    • Color: Carbon, Gloss finish
    • Sizes: 54-55-56-57-58-59-60-61-61+
    • Homologation: FIA8859-2015 & SNELL SA2020

    IN THE BOX

    • MAG-10 Carbon
    • M10S-Short
    • HP Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • FIA8859-2015
    • SNELL SA2020
    Bell RS7 Pro Stamina
    Bell RS7 Pro Stamina
    Bell RS7 Pro Stamina
    Bell RS7 Pro Stamina

    Bell RS7 Pro Stamina

    £833.33 ex VAT
    /

    Based on the HP7 design and featuring a lightweight carbon fiberglass composite shell, the RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensure air, water and dust will not enter in the eyeport.

    FEATURES

    • Lightweight Premium Carbon Fiberglass Composite shell
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
    • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
    • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities
    • Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
    • Factory installed Hans anchors as original equipment
    • Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
    • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
    • Interior: Dark Grey High Strength – High Comfort FR Fabric
    • Shield and pivot kit: SE07, SV(SE07)
    • Color: White or Matte Black
    • Available as well with exciting and trendy Graphics and Matte finish: o Stamina Red o Stamina Grey
    • Sizes: 54-55-56-57-58-59-60-61-61+
    • Homologation: FIA8859-2015 & SNELL SA2020

    IN THE BOX

    • RS7 PRO STAMINA
    • Shield and pivot kit: SE07, SV(SE07)
    • HP Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • FIA8859-2015
    • SNELL SA2020
    Bell RS7 Pro
    Bell RS7 Pro
    Bell RS7 Pro
    Bell RS7 Pro

    Bell RS7 Pro

    £658.33 ex VAT
    /

    Based on the HP7 design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the RS7 uses and innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eyeport.

    FEATURES

    • Lightweight carbon composite shell
    • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
    • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
    • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
    • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
    • Integrated channels in face piece offer multiple options to install drink tube and radio systems
    • Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
    • Top air attachments available separately for use with external cooling systems
    • Factory installed Hans posts as original equipment
    • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
    • Shield and pivot kit: SE07, SV(SE07)
    • Homologation: FIA8859-2015 & SNELL SA2020
    • Colors: white & matte black
    • Sizes: 54 to 61+

    IN THE BOX

    • RS7
    • Clear SE07 DSAF Shield
    • Draw String Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • Snell SA2020
    • FIA8859-2015
    Bell GT6 Pro
    Bell GT6 Pro
    Bell GT6 Pro
    Bell GT6 Pro

    Bell GT6 Pro

    £614.16 ex VAT
    /

    The GT6 PRO features the same modern and aggressive design as HP6, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear-muffs providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version).

    FEATURES

    • Lightweight Premium Carbon Fiberglass Composite shell
    • Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06)
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
    • Extraction vents to maximize cooling and air circulation
    • Factory installed Hans anchors as original equipment
    • Optional Top and Side air intakes available for use with external cooling system
    • Optional side-cover (L or R) for smooth integration of radio connectors and hydration system
    • Optional Ear-Muffs for increased noise insulation
    • Interior: Dark Grey High Strength – High Comfort FR Fabric
    • Color: White or Matte Black
    • Sizes: 54-55-56-57-58-59-60-61-61+
    • Homologation: FIA8859-2015 & SNELL SA2020

    IN THE BOX

    • GT6 PRO
    • Shield type SE06
    • HP Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • FIA8859-2015
    • SNELL SA2020
    Bell RS7-K
    Bell RS7-K
    Bell RS7-K
    Bell RS7-K
    Bell RS7-K
    Bell RS7-K

    Bell RS7-K

    £521.74 ex VAT
    /

    Purpose-built for the hard-charging kart racer, the RS7-K is the karting-only version (non-fire retardant, extra durable interior) of the RS7. Based on the HP7 design and featuring a lightweight carbon composite shell, the RS7-K uses an innovative shell and shield design to improve acoustic comfort while enhancing aerodynamic performance and energy absorbing capacities. The sleek, modern design features an advanced ventilation system, double screen anti-fog (DSAF) visor and a rubber gasket seal ensuring that water does not enter the eye opening in rain conditions.

    FEATURES

    • Lightweight carbon composite shell
    • Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
    • Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
    • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
    • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
    • Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
    • Non-fireproof lining for extra durability
    • RS7K is NOT compatible with FHR anchor systems or devices
    • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
    • Shield and pivot kit: SE07, SV(SE07)
    • Homologation: Snell K2020 approved
    • Color: white
    • Sizes: S, M, L, XL

    IN THE BOX

    • RS7-K
    • Clear SE07 DSAF Shield
    • Draw String Helmet Bag
    • Hans Anchors Installed

    SIZING

    CERTIFICATIONS

    • Snell K2020
    Bell GT5 Sport
    Bell GT5 Sport
    Bell GT5 Sport
    Bell GT5 Sport

    Bell GT5 Sport

    £439.16 ex VAT
    /

    The new GT5 SPORT is a versatile modern helmet designed primarily for entry level racers who demand quality and performance at a value price. It can be used as a large eyeport helmet with a standard shield or as an open helmet with an adjustable visor peak (optional), combining the feel of an open-face with the protection of a full-face model. The perfect helmet for racers just entering the sport on a budget, it is equally suited for closed cars or open cockpit machinery.

    FEATURES

    • Fiberglass Composite shell
    • Wide eyeport (Shield type SE05)
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
    • Ventilation channels
    • Available with or without Hans anchors as original equipment
    • Interior: Black FR fabric
    • Color: White
    • Sizes: S-M-L-XL
    • Homologation: FIA8859-2015

    IN THE BOX

    • GT5 SPORT
    • Shield type SE05
    • HP Helmet Bag

    SIZING

    CERTIFICATIONS

    • FIA8859-2015
    Bell KC7-CMR

    Bell KC7-CMR

    £426.09 ex VAT
    /

    The KC7 CMR is a lightweight youth karting helmet based on the F1 proven HP7 design platform. The sleek, aerodynamic design features an advanced ventilation system that can be used with or without air-intakes to maximize cooling and a double screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR standard and certified for global competition, the KC7 is designed to minimize helmet weight for karting drivers under the age of 15 and perfect for the next generation of champions as they start their racing career in karting.

    FEATURES

    • Lightweight Carbon Fiberglass Composite shell: 1,185g in sized 52 to 56 and 1,230g in sizes 57 to 59 (+ or – 3%)
    • Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
    • Optical grade injected Double Screen Anti-Fog (DSAF) 2MM visor for anti-fog control and superior visibility
    • Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
    • Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
    • Rear spoiler available separately
    • KC7 is NOT compatible with FHR anchor systems or devices
    • Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
    • Shield and pivot kit: SE07 2MM, SV(SE07) (This shield only fit the KC7 Range)
    • Interior: Non-fireproof lining for extra durability
    • Black High Strength – High Comfort Fabric and synthetic leather
    • Color: White
    • Sizes: 52-53-54-55-56-57-58-59
    • Homologation: SNELL-FIA CMR-2016

    IN THE BOX

    • KC7 CMR
    • Clear SE07 2MM DSAF Shield
    • Draw String Helmet Bag

    SIZING

    CERTIFICATIONS

    • Snell-FIA
    • CMR-2016