Bell HP77 Carbon

£4,299.99 ex VAT

The HP77, based on Bell’s highly successful, F1 World Champion proven HP7 design, provides the latest impact protection by lowering the visor opening by 12 mm and reinforcing the front of the helmet with advanced ballistic protection. The HP77 is the most advanced FIA8860-2018 helmet in Bell’s product line and sets a new standard for lightweight, aerodynamically superior carbon fiber helmet performance for the intense demands of open-wheel and open-cockpit forms of racing. The HP77 is homologated to the FIA8860-2018 ABP standard, the most rigorous sport helmet standard on the planet, designed for professional formula racers competing at the highest levels of the sport.

FEATURES

Visor opening lowered 12 mm with integrated visor panel into the front of the helmet for added ballistic protection from middle size debris
High-strength and high modulus carbon fibers ultra-lightweight FIA8860 carbon shell
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation
Air intake system includes two-part center and side air intakes (installed)
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Integrated channels in face piece offer multiple options to install drink tube and radio systems
Top spoiler, top and chin bar gurneys available separately
Factory installed Hans anchors as original equipment
Available with frontal chinbar hole for the introduction of the drinking tube
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
HP helmet bag included
Shield and pivot kit: SE077, SV(SE07)
Homologation: FIA8860-2018 ABP
Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
Color: Carbon, Matte Finish
Sizes: 54 to 59+

IN THE BOX

HP77
Clear SE077 DSAF Shield
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8860-2018 ABP

Bell HP7 EVO-III Carbon

£2,983.33 ex VAT

Developed through close collaboration with leading F1 drivers and teams, the carbon fiber HP7 is aerodynamically sleek, lightweight and efficient for the intense demands of open-wheel and open-cockpit forms of racing. The updated HP7 EVO-III meets the FIA’s FIA8860-2018 “super helmet” standard, the most advanced sport helmet standard in the world. Designed for professional drivers competing in high-speed forms of motorsports, the HP7 allows racers to take advantage of the latest technological innovations including aerospace composite materials and advanced energy absorbing liner systems.

FEATURES

High-strength and high modulus carbon fiber ultra-lightweight FIA8860 carbon shell
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation
Air intake system includes two-part center and side air intakes (installed)
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities Integrated channels in face piece offer multiple options to install drink tube and radio systems
Available in two versions: with or without duckbill (chin spoiler)
Top spoiler, top and chin bar gurneys available separately
Factory installed Hans anchors as original equipment
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Available with frontal chinbar hole for the introduction of the drinking tube
HP helmet bag included
Shield and pivot kit: SE07, SV(SE07)
Homologation: FIA8860-2018
Alternative interior fabric colors: Black, White, Red, Tan, Purple, Blue, Green and Neon Yellow (by special order - additional charges will apply). Grey is standard
Color: Carbon, Matte Finish
Sizes: 54 to 59+

IN THE BOX

HP7
Clear SE07 DSAF Shield
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8860-2018

Bell RS7 Carbon

£1,141.66 ex VAT

Based on the innovative HP7 design and featuring an ultra-lightweight carbon shell, using Bell’s high-pressure proprietary molding system, the RS7 Carbon provides racers with unmatched acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels for maximum airflow and ventilation.

FEATURES

Ultra-lightweight carbon shell
Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
Air intake system includes two-part center and side air intakes (installed)
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Integrated channels in face piece offer multiple options to install drink tube and radio systems
Available in two versions: with or without duckbill (chin spoiler)
Rear spoiler, top and chin bar gurneys available separately
Top air attachments available separately
Factory installed Hans anchors as original equipment
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Shield and pivot kit: SE07, SV(SE07)
Homologation: Snell SA2015 and FIA8859-2015 approved
Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order - additional charges will apply)
Color: Carbon, Glossy finish
Sizes: 54 to 61+

IN THE BOX

RS7 Carbon
Clear SE07 DSAF Shield
Draw String Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

Snell SA2020
FIA8859-2015

Bell GT6 Carbon

£964.99 ex VAT

Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear-muffs providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version).

FEATURES

Ultra-lightweight Premium Carbon Composite shell
Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06)
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
Extraction vents to maximize cooling and air circulation
Factory installed Hans anchors as original equipment
Optional Top and Side air intakes available for use with external cooling system
Optional side-cover (L or R) for smooth integration of radio connectors and hydration system
Optional Ear-Muffs for increased noise insulation
Interior: Dark Grey High Strength – High Comfort FR Fabric
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
Color: Carbon, Gloss finish
Sizes: 54-55-56-57-58-59-60-61-61+
Homologation: FIA8859-2015 & SNELL SA2020

IN THE BOX

GT6 Carbon
Shield type SE06
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8859-2015
SNELL SA2020

Bell RS7-K Carbon

£964.99 ex VAT

Designed for the professional kart racer who values weight and performance, the RS7-K Carbon is the karting-only version (non-fire retardant, extra durable interior) of the RS7. Based on the HP7 design and featuring a lightweight carbon shell, the RS7-K Carbon uses an innovative shell and shield design to improve acoustic comfort while enhancing aerodynamic performance and energy absorbing capacities. The sleek, modern design features an advanced ventilation system, double screen anti-fog (DSAF) visor and a rubber gasket seal ensuring that water does not enter the eye opening in rain conditions.

FEATURES

Lightweight carbon shell
Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
Non-fireproof lining for extra durability
RS7K is NOT compatible with FHR anchor systems or devices
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Shield and pivot kit: SE07, SV(SE07)
Homologation: Snell K2020 approved
Color: carbon, glossy finish
Sizes: 57 to 61+

IN THE BOX

RS7-K Carbon
Clear SE07 DSAF Shield
Draw String Helmet Bag

SIZING

Sizes: Sizes: 57 (7 1/8) to 61+ (7 5/8 +)
Sizing Chart
Helmet Fitting Guide

CERTIFICATIONS

Snell K2020

Bell KC7-CMR Carbon

£921.99 ex VAT

Bell continues to innovate with the KC7 CMR Carbon, the first ultra-lightweight carbon youth karting helmet on the market. Based on the advanced HP7 and incorporating the same performance technology, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rain conditions. Certified to the FIA/Snell CMR standard designed for karting drivers under the age of 15, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers.

FEATURES

Ultra-lightweight carbon shell: 1095g in sizes 54 to 56 and 1130g in sizes 57 to 59 (+ or - 3%)
Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) 2MM visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
Air intake system includes two-part center and side air intakes (installed)
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Rear spoiler, top and chin bar gurneys available separately
KC7 Carbon is NOT compatible with FHR anchors or devices
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Shield and pivot kit: SE07 2MM, SV(SE07)
Homologation: Snell-FIA CMR-2016
Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order - additional charges will apply)
Color: Carbon, glossy finish
Sizes: 54 (6 3/4) to 59 (7 3/8)

IN THE BOX

KC7 CMR Carbon
Clear SE07 2MM DSAF Shield
Draw String Helmet Bag

SIZING

54 (6 3/4) to 59 (7 3/8)
Sizing Chart
Helmet Fitting Guide

CERTIFICATIONS

Snell-FIA
CMR-2016

Bell HP10 Rally Carbon

£2,105.83 ex VAT

The new HP10 Rally incorporates the advanced technology of our HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate performance open-face rally helmet. Featuring an ultra-lightweight carbon shell combined with a Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, highly comfortable professional fit combined with outstanding sound-insulation, HP10 Rally is the new reference for rally drivers and co-drivers looking for the ultimate product. Our helmet R&D engineers worked day and night with sound engineers and top rally drivers to deliver a helmet that would set new standards! No effort was spared to obtain outstanding performances of sound insulation and communication efficiency, incorporating ZeroNoise® electronics, high power speakers and noise-cancelling microphone, and to deliver the best experience in terms of safety, comfort and communication.

FEATURES

Open face helmet featuring ultra-lightweight FIA8860-2018 Advanced full carbon shell

Fast Removable Carbon Half Chin Bar (HCB) quickly and easily detachable to ensure fast access to breathing ways without the need to remove the helmet in case of emergency

Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance

Adjustable carbon sun peak

Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) fitted as original equipment + dark smoked (M10-Long version) supplied in the box

Removable cheek pads with multi densities advanced materials for optimal comfort

Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation

ZeroNoise® electronics, high power (yet lightweight) speakers and adjustable efficient noise cancelling microphone integrated in Half Chin Bar

Ultra-reliable heavy duty In-Molded Female Nexus Connector (compatible with other brands of amplifiers)

Detachable right side-cover for smooth integration of the Female Nexus Connector

Flat right side carbon cover supplied in the box, for those who prefer using a straight cable coming out of the helmet instead of the integrated connector

Air extraction holes to maximize cooling

Factory installed Hans anchors as original equipment

HP helmet bag included

Interior: Dark Grey High Strength – High Comfort FR Fabric

Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).

Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort

Color: Carbon, Matte finish

Sizes: 54-55-56-57-58-59-60-61-61+

Homologation: FIA8860-2018

IN THE BOX

HP10 RALLY
dark smoked (M10-Long version)
HP Helmet Bag

SIZING

CERTIFICATIONS

FIA8860-2018

Bell HP10 Carbon

£1,842.49 ex VAT

The new HP10 incorporates the advanced technology of our HP7 state-of-the art Advanced Helmets in a sleek and modern design that provides the ultimate open-face helmet protection. Featuring an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, and highly comfortable professional fit. HP10 is perfect for racers who want the feeling of an open-face helmet but demand outstanding comfort and superior performance.

FEATURES

Open face helmet featuring ultra-lightweight FIA8860-2018 Advanced full carbon shell
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Adjustable carbon sun peak
Adjustable integrated anti-scratch sunscreen: ML Red mirror (M10S-Short) fitted as original equipment + dark smoked (M10-Long version) supplied in the box
Removable cheek pads with multi densities foam for optimal comfort
Air extraction holes to maximize cooling
Factory installed Hans anchors as original equipment
HP helmet bag included
Interior: Dark Grey High Strength – High Comfort FR Fabric
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (on special order).
Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
Color: Carbon, Matte finish
Sizes: 54-55-56-57-58-59-60-61-61+
Homologation: FIA8860-2018

IN THE BOX

HP10
ML Red mirror (M10S-Short)
dark smoked (M10-Long version)
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8860-2018

Bell MAG-10 Rally Carbon

£1,053.33 ex VAT

Based on the HP10 Rally, the MAG-10 RALLY CARBON is a sophisticated, ultra-lightweight Premium Helmet in a sleek and modern design that provides a high performance open-face rally helmet. Featuring an ultra-lightweight carbon composite shell combined with our Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, highly comfortable professional fit combined with outstanding sound-insulation, MAG-10 RALLY CARBON is the new helmet of choice for rally drivers and co-drivers looking for a high-end Premium product. Benefiting from the extensive Research & Development program undertaken for the HP10, the MAG-10 RALLY CARBON sets new standards in the Premium Helmets category! No effort was spared to obtain outstanding performances of sound insulation and communication efficiency, incorporating ZeroNoise® electronics, high power speakers and noise cancelling microphone, and to deliver the best experience in terms of safety, comfort and communication.

FEATURES

Open face helmet featuring ultra-lightweight Premium carbon composite shell
Fast Removable Carbon Half Chin Bar (HCB) quickly and easily detachable to ensure fast access to breathing ways without the need to remove the helmet in case of emergency
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Adjustable carbon sun peak
Adjustable integrated anti-scratch dark smoked sunscreen
Integrated cheek pads with multi densities advanced materials for optimal comfort
Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation
ZeroNoise® electronics, high power (yet lightweight) speakers and efficient noise cancelling microphone.
Ultra-reliable heavy duty In-Molded Female Nexus Connector (compatible with other brands of amplifiers)
Detachable right side-cover for smooth integration of the Female Nexus Connector
Flat right side cover supplied in the box, for those who prefer using a straight cable coming out of the helmet instead of the integrated connector
Factory installed Hans anchors as original equipment
Interior: Dark Grey High Strength – High Comfort FR Fabric
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
Color: Carbon, Gloss finish
Sizes: 54-55-56-57-58-59-60-61-61+
Homologation: FIA8859-2015 & SNELL SA2020

IN THE BOX

MAG-10 RALLY Carbon
M10S-Short
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8859-2015
SNELL SA2020

Bell MAG-10 Carbon

£964.99 ex VAT

HelmetThe MAG-10 CARBON is a sophisticated, ultra-lightweight Premium Helmets in a sleek and modern design that provides a high performance open-face helmet for racetrack use. Featuring an ultra-lightweight carbon composite shell, an adjustable carbon fiber peak combined with our new adjustable and integrated sunscreen, a highly comfortable professional fit, MAG-10 CARBON is the helmet of choice for racing drivers looking for a high-end super-light Premium open face helmet for circuit use.

FEATURES

Open face helmet featuring ultra-lightweight Premium carbon composite shell
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Adjustable carbon sun peak
Adjustable integrated anti-scratch dark smoked sunscreen (M10S-Short)
Removable cheek pads with multi densities advanced materials for optimal comfort
Factory installed Hans anchors as original equipment
Interior: Dark Grey High Strength – High Comfort FR Fabric
Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order).
Adjustable sunscreens available as accessories in various colors and TWO lengths to ensure optimal visual comfort
Color: Carbon, Gloss finish
Sizes: 54-55-56-57-58-59-60-61-61+
Homologation: FIA8859-2015 & SNELL SA2020

IN THE BOX

MAG-10 Carbon
M10S-Short
HP Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

FIA8859-2015
SNELL SA2020

Bell RS7 Pro

£658.33 ex VAT

Based on the HP7 design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the RS7 uses and innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capabilities. The sleek, modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake covers (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensured air, water and dust will not enter the eyeport.

FEATURES

Lightweight carbon composite shell
Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
Integrated channels in face piece offer multiple options to install drink tube and radio systems
Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately
Top air attachments available separately for use with external cooling systems
Factory installed Hans posts as original equipment
Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
Shield and pivot kit: SE07, SV(SE07)
Homologation: FIA8859-2015 & SNELL SA2020
Colors: white & matte black
Sizes: 54 to 61+

IN THE BOX

RS7
Clear SE07 DSAF Shield
Draw String Helmet Bag
Hans Anchors Installed

SIZING

CERTIFICATIONS

Snell SA2020
FIA8859-2015

Bell GT6 Pro

£614.16 ex VAT

The GT6 PRO features the same modern and aggressive design as HP6, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an lightweight Premium carbon glass shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear-muffs providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version).

FEATURES

Lightweight Premium Carbon Fiberglass Composite shell
Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06)
Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems
Extraction vents to maximize cooling and air circulation
Factory installed Hans anchors as original equipment
Optional Top and Side air intakes available for use with external cooling system
Optional side-cover (L or R) for smooth integration of radio connectors and hydration system
Optional Ear-Muffs for increased noise insulation
Interior: Dark Grey High Strength – High Comfort FR Fabric
Color: White or Matte Black
Sizes: 54-55-56-57-58-59-60-61-61+
Homologation: FIA8859-2015 & SNELL SA2020

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

FEATURES

IN THE BOX

SIZING

CERTIFICATIONS

Sign up and save